Description
Luckily, the exposed Rimcore seems to be a suitable source for a new type of fuel! Here, take these two Rimcore Turbopumps and mount them outside your spaceship.
Carefully fly over the exposed Rimcore and, once you’re close enough, turn on the pumps to collect the gases. But don’t get too close — unless melting your entire spaceship is part of the plan.
- The Rimcore is the red-colored biome located on the side of the planet with the red atmosphere.
- Once you’re close enough to the Rimcore, you should be able to see particles coming out of it. That means you’re close enough to start collecting the gases.
- For maximum efficiency, make sure to place Rimcore Turbopumps outside your ship with no obstacles in front of the fan.
⚠️ We recommend completing The Living Radiation mission first, as it rewards you with Power Nanocables, which are extremely useful for this mission!
Select the planet Rimshell and start at the Altimirror base.
You'll find two Rimcore Turbopumps available in your inventory. Mount both outside your spaceship, making sure there are no obstacles in front of them so they can collect particles directly from the Rimcore.
Be careful, as each Rimcore Turbopump consumes 300 P/s of electrical power! Regular Power Cables cannot handle this much power and will burn out.
We recommend using Power Nanocables, which can safely handle up to 400 P/s!
The Rimcore is the red-colored biome located on the side of the planet with the red atmosphere.
Once you get close enough to the Rimcore, you should start seeing particles rising from its surface.
To collect the gas, you'll need to descend close enough to the surface for the Rimcore Turbopumps to reach these particles.
Activate both pumps and watch for particles being drawn into them. If you can see particles entering the pumps, you're close enough to begin collecting gas! If no particles are entering, you'll need to descend a little further.
Be careful, though! The Rimcore is extremely hot, and getting too close can cause your spaceship to overheat and melt!
Using a Solar Shield can help protect your spaceship from the intense heat, although it's entirely possible to complete this mission without one. It will just be a little more challenging!
We also recommend using a Thermometer to monitor the temperature and avoid overheating your spaceship.
Once both Rimcore Turbopumps are collecting particles, maintain your position and wait for them to fill with gas.
It takes 100 seconds to collect all the required gas, so you'll need to remain in the collection area for a while!
You can check the status of each pump by looking at the indicator lights on its front panel. Once both indicators turn green, the pumps are completely filled and you're ready to return to the base.
After successfully filling both Rimcore Turbopumps, transport them back to the Altimirror base.
Once you arrive at the base, the pumps will start glowing and blinking, indicating that you've reached the correct location.
Keep your spaceship stationary for 10 seconds to complete the mission. You can then safely exit Fly Mode.
Objective item
Reward
Creations that might help
Albatross Mk II
Mycroft 33@mycroftLikes: 3Comments: 0Views: 786k components
VauxhallTTHEREALBMW@therealbmwLikes: 2Comments: 0Views: 285.3k components
CarGoSpace
sabry_@sabry_Likes: 2Comments: 0Views: 343.3k components
PID Compact - Auto hover + Auto landing
Luiz Carvalho@rocketmanLikes: 2Comments: 0Views: 186122 components
Explorer-NanoCcueio@cueioLikes: 1Comments: 0Views: 32849 components
IST Hail MarySr. Migaspin@migthewiseLikes: 0Comments: 0Views: 52k components
RainesTTHEREALBMW@therealbmwLikes: 0Comments: 0Views: 172k components
MK1 Heavy Haulersankto@sanktoLikes: 0Comments: 0Views: 306.7k components
Toaster Mk III
Mycroft 33@mycroftLikes: 0Comments: 0Views: 233.1k components
