Description
It looks like these two Outcast Polar Anchors should be able to stabilize the planet’s ionosphere and finally stop the extreme winds around the equator.
First, use the Magnetometer to locate the north and south poles as precisely as possible. You may remember using it before to predict solar storms. There should be no wind near the poles, so at least that part should be easy.
Charge both Polar Anchors during your flight and make sure they have enough operating time. Once you activate the first anchor, the clock starts ticking — you’ll need to reach the opposite pole and activate the second one before the first shuts down. Watch the display and plan your route carefully.
One more thing: once activated, the anchors will burn any cables within a fairly large radius. Drop the anchor using decouplers, move your spaceship to a safe distance, and only then activate it.
Make sure you have enough time. Flying halfway around a planet just to watch the first anchor die would be... unfortunate.
- Use the Magnetometer to locate both poles as precisely as possible.
- Make sure the first Polar Anchor has enough charge before dropping and activating it — once left behind, you won’t be able to charge it anymore.
- You can continue charging the second Polar Anchor while flying to the opposite pole.
- Activate the second anchor before the first one runs out of power.
- Keep your spaceship at a safe distance when activating an anchor — it will burn nearby cables.
Select the planet Outcast and start at the Crownleaf base. However, you can actually start this mission from anywhere, even from a completely different planet! Your starting location doesn't matter.
You'll find two Outcast Polar Anchors available in your inventory. Mount them inside or outside your spaceship, making sure you have a way to detach at least one of them during the mission.
Your objective is to activate one Outcast Polar Anchor at the north pole and the other at the south pole of Outcast. The order doesn't matter, so you can choose which pole to visit first.
Fortunately, you don't have to worry too much about the extreme winds near the poles. The strongest winds are concentrated around the planet's equator, while the polar regions are much calmer.
Preparing the Polar Anchors
Both Outcast Polar Anchors need to be charged with electrical power from your spaceship's batteries.
Each anchor has a lever on its front panel that allows you to control its charging speed. Be careful not to exceed the maximum power throughput of your cables, or they might burn out!
The images below show what both poles look like in the landscape. One is located on the illuminated side of the planet, while the other is in darkness.
We recommend visiting the illuminated pole first, as activating the first anchor requires a few additional steps that are easier to perform in daylight.
Once you enter Fly Mode, start charging your first Outcast Polar Anchor.
After activation, the anchor continuously consumes 40 units of stored energy per second. This means you can calculate exactly how much time you have before it runs out of power!
For example, charging the anchor to 80,000 units will allow it to operate for 2,000 seconds, giving you approximately 33 minutes to reach the opposite pole and activate the second anchor!
You can choose how much energy to store in the anchor, but make sure you charge it enough to give yourself sufficient time to complete the journey.
Activating the First Polar Anchor
Head toward the first pole, preferably the one located on the illuminated side of the planet.
We recommend using a Magnetometer to locate the poles. Once its reading exceeds 0.95, you'll know you're close enough to the correct location!
However, it's entirely possible to complete this mission without a Magnetometer. You can also use your Radar and estimate the pole's location visually.
Once you reach the correct area, a green indicator light will appear on the front panel of the Outcast Polar Anchor, confirming that you're in the right location.
The image below shows an Outcast Polar Anchor charged to 83,225 units of energy, providing approximately 35 minutes of operation.
Now comes the tricky part!
You'll need to detach the first Outcast Polar Anchor from your spaceship using decouplers.
Once it's detached, move your spaceship a few hundred meters away from the anchor.
Then return to the anchor on foot and activate it manually using the round button on its front panel.
Be careful! Once activated, the Outcast Polar Anchor will instantly burn out every electrical cable within a 27 meter radius!
This is why it's important to detach the anchor and move your spaceship to a safe distance before activating it.
Once you've successfully activated the first anchor, you'll notice a visual effect appearing around it.
Now hurry back to your spaceship and head toward the opposite pole! Remember, the first anchor is continuously consuming its stored energy, so you have limited time to activate the second one.
Activating the Second Polar Anchor
Use your Magnetometer or Radar to navigate toward the opposite pole.
Once you arrive, you can activate the second Outcast Polar Anchor directly inside your spaceship if you prefer.
Unlike the first anchor, you don't need to worry about protecting your spaceship from the electrical damage caused by the second activation. You won't need to return to any base after completing this mission, so it's perfectly fine if your spaceship's electrical cables burn out!
Both anchors need to remain active for 20 seconds to successfully stabilize Outcast's ionosphere.
Since each anchor consumes 40 units of energy per second, make sure the second anchor is charged to at least 800 units before activating it. This will provide enough energy to keep it running for the required 20 seconds.
Restoring Outcast's Ionosphere
Once you've activated the second Outcast Polar Anchor, we recommend stepping outside your spaceship to enjoy the view!
You'll witness an impressive visual effect as the entire sky begins to flicker, accompanied by a unique sound effect.
After 20 seconds, the mission will be completed, and Outcast's ionosphere will be restored!
The extreme winds that previously affected the planet will disappear, making exploration and landing significantly easier.
We recommend continuing with the remaining missions on Outcast, as you'll now be able to complete them without having to deal with the extreme winds!
Reward
No component to earn here — this objective unlocks others.
Creations that might help
Albatross Mk II
Mycroft 33@mycroftLikes: 3Comments: 0Views: 786k components
VauxhallTTHEREALBMW@therealbmwLikes: 2Comments: 0Views: 285.3k components
CarGoSpace
sabry_@sabry_Likes: 2Comments: 0Views: 343.3k components
PID Compact - Auto hover + Auto landing
Luiz Carvalho@rocketmanLikes: 2Comments: 0Views: 181122 components
Explorer-NanoCcueio@cueioLikes: 1Comments: 0Views: 31849 components
IST Hail MarySr. Migaspin@migthewiseLikes: 0Comments: 0Views: 52k components
RainesTTHEREALBMW@therealbmwLikes: 0Comments: 0Views: 172k components
MK1 Heavy Haulersankto@sanktoLikes: 0Comments: 0Views: 296.7k components
Toaster Mk III
Mycroft 33@mycroftLikes: 0Comments: 0Views: 233.1k components
